<?xml version="1.0" encoding="UTF-8"?><metadata>
<idinfo>
<ptcontac>
<cntinfo>
<cntperp>
<cntper>Larry Szarek</cntper>
<cntorg>PWD/GIS</cntorg>
</cntperp>
<cntpos>GIS Manager</cntpos>
<cntaddr>
<addrtype>mailing and physical address</addrtype>
<address>1101 Market Street, ARAMARK TOWER, 4th floor</address>
<city>Philadelphia</city>
<state>PA</state>
<postal>19107</postal>
</cntaddr>
<cntvoice>215-685-6333</cntvoice>
<cntfax>215-685-6207</cntfax>
<cntemail>larry.szarek@phila.gov</cntemail>
<hours>Mon - Fri, 8:30am - 5:00pm</hours>
<cntinst>Please email or telephone your request. You will be directed to follow the guidelines by providing via postal mail the signed letters required. Then your request will be prioritized among the staff and the staff member will contact you directly with information regarding your project. </cntinst>
</cntinfo>
</ptcontac>
<accconst>In order to obtain GIS data from the Philadelphia Water Department in electronic format, we require two letters of request and intent. One letter must be from the City Agency or Community group that has contracted your firm, stating that they have hired your firm to do this work. The second letter must be on your firm's own letterhead and must include the following information: A title for the project. A brief rationalization for the request. A description of the geospatial coverage(s) required. any plans for the publication/dissemination of the data. A statement that this data shall be for the exclusive use of this project and shall not be used for any other project, nor shall it be distributed to any other user. A statement that this data will be installed on one (1) computer hard drive only and shall be erased from that computer hard drive upon the completion of the project. A statement that this data shall NOT in any way be published on the Internet. a statement that the requestor will not hold the City of Philadelphia responsible for any data inaccuracies or any modifications that the requestor makes to the original data.
We require these letters from everyone who wants digitally distributed data. We may provide the data in the following formats: ESRI shapefiles or Personal ESRI Geodatabases. We can also provide a PDF of a map area or a TIF or JPEG (JPG)</accconst>
<descript>
<langdata Sync="TRUE">en</langdata>
<abstract>This data shows Philadelphia Water Department Utility Assets. Its accuracy varies by location. Most of the data is accurate to +/- 1 ft based on the Construction As-Built Drawings it was digitized from. Some areas such as the Philadelphia Naval Business District (Navy Yard) or the Airport are not nearly as accurate as they were derived from other sources. These sources include but are not limited to: old navy construction documents, field surveys, various conflicting maps both digital and paper. The data took three years to create and it is maintained daily by PWD GIS UNIT. The new maintenance edits are of higher spatial accuracy as GPS equipment is available for field surveys. Query the edited_date field after May 2005 to see the newer edits. </abstract>
<purpose>The Purpose of this data is to describe the asset both locationally and via its attributes which are extensive for a GIS dataset and which are maintained. This data will serve as a platform for planning, analysis and research at PWD. </purpose>
<supplinf>The data was converted to coverages by CH2MHILL and its subcontractors. PWD GIS Unit decided to use Geometric Networks for maintenance and so had these coverages brought into 5 different networks: Water, Raw Water, Waste Water and Storm Water and High Pressure Fire System (Decommissioned 2004). Importing the coverages into the geometric networks was a considerable task but allowed PWD GIS to create a full set of connectivity rules which assist greatly in maintenance. Also, models are run to check for attribute accuracy. </supplinf>
</descript>
<useconst>see above</useconst>
<crossref>
<citeinfo>
<origin>PWD and CH2MHILL</origin>
<pubdate>08/2005</pubdate>
<title>Philadelphia Water Department GIS Dataset</title>
<othercit>Water
Raw Water
WasteWater
Storm Water
HPFS</othercit>
</citeinfo>
</crossref>
<timeperd>
<timeinfo>
<sngdate>
<caldate>01/1880- present</caldate>
</sngdate>
</timeinfo>
<current>The data is maintained in Versions daily and posted twice a week to PWD server. Once a week to GSG Ciy server. The data is from documents ranging from 1880 to the present day</current>
</timeperd>
<datacred>PWD Projects Control/GIS UNIT and CH2MHILL</datacred>
<citation>
<citeinfo>
<origin>PWD/GIS and CH2MHILL</origin>
<pubdate>08/2005</pubdate>
<title Sync="TRUE">Infrastructure_Public.GISAD.wHydrant</title>
<ftname Sync="TRUE">Infrastructure_Public.GISAD.wHydrant</ftname>
<geoform Sync="TRUE">vector digital data</geoform>
<onlink Sync="FALSE">withheld</onlink>
<pubinfo>
<pubplace>City of Philadelphia</pubplace>
<publish>Philadelphia Water Department</publish>
</pubinfo>
</citeinfo>
</citation>
<keywords>
<place>
<placekt>PA</placekt>
<placekey>Philadelphia</placekey>
<placekey>City of Philadelphia</placekey>
</place>
<theme>
<themekt>Water Department</themekt>
<themekey>Hydrant</themekey>
<themekey>Hydrants</themekey>
<themekey>Fire Hydrants</themekey>
<themekey>utilitiesCommunication</themekey>
</theme>
<theme>
<themekt>PWD</themekt>
</theme>
<theme>
<themekt>Water</themekt>
</theme>
<theme>
<themekt>Philadelphia Water Department</themekt>
</theme>
<place>
<placekt>City of Philadelphia</placekt>
</place>
</keywords>
<status>
<progress>Ongoing</progress>
<update>Daily to PWD SQL Server, Weekly to GSG Spatial DataWarehouse</update>
</status>
<secinfo>
<secsys>This data holds all assets of the Water and Sewer utility and in this regard is sensitive in nature</secsys>
<secclass>Sensitive</secclass>
<sechandl>Only the hydrants and inlets of this data set should be widely available. All other feature classes are provided to City personnel on an as needed basis. The feature classes are provided to the public in sections (never the full City dataset) when the request is made via "Right To Know" Act</sechandl>
</secinfo>
<native Sync="FALSE">ESRI ArcCatalog 9.3.1.4000</native>
<natvform Sync="FALSE">Feature Class</natvform>
<spdom>
<bounding>
<westbc Sync="TRUE">-75.278038</westbc>
<eastbc Sync="TRUE">-74.958093</eastbc>
<northbc Sync="TRUE">40.150504</northbc>
<southbc Sync="TRUE">39.851428</southbc>
</bounding>
<lboundng>
<leftbc Sync="TRUE">2662397.971108</leftbc>
<rightbc Sync="TRUE">2748899.689248</rightbc>
<bottombc Sync="TRUE">201019.280653</bottombc>
<topbc Sync="TRUE">307437.664101</topbc>
</lboundng>
</spdom>
</idinfo>
<Esri>
<ModDate>20203725</ModDate>
<ModTime>77NnS5900</ModTime>
<CreaDate>20231010</CreaDate>
<CreaTime>16551600</CreaTime>
<SyncOnce>TRUE</SyncOnce>
<SyncDate>20200429</SyncDate>
<SyncTime>12345800</SyncTime>
<DataProperties>
<itemProps>
<itemName Sync="TRUE">Infrastructure_Public.GISAD.wHydrant</itemName>
<imsContentType Sync="TRUE">002</imsContentType>
<nativeExtBox>
<westBL Sync="TRUE">2581351.257636</westBL>
<eastBL Sync="TRUE">2749587.058670</eastBL>
<southBL Sync="TRUE">201017.482456</southBL>
<northBL Sync="TRUE">304910.934556</northBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</nativeExtBox>
</itemProps>
<coordRef>
<type Sync="TRUE">Projected</type>
<geogcsn Sync="TRUE">GCS_North_American_1983</geogcsn>
<csUnits Sync="TRUE">Linear Unit: Foot_US (0.304801)</csUnits>
<projcsn Sync="TRUE">NAD_1983_StatePlane_Pennsylvania_South_FIPS_3702_Feet</projcsn>
<peXml Sync="TRUE">&lt;ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/10.5'&gt;&lt;WKT&gt;PROJCS[&amp;quot;NAD_1983_StatePlane_Pennsylvania_South_FIPS_3702_Feet&amp;quot;,GEOGCS[&amp;quot;GCS_North_American_1983&amp;quot;,DATUM[&amp;quot;D_North_American_1983&amp;quot;,SPHEROID[&amp;quot;GRS_1980&amp;quot;,6378137.0,298.257222101]],PRIMEM[&amp;quot;Greenwich&amp;quot;,0.0],UNIT[&amp;quot;Degree&amp;quot;,0.0174532925199433]],PROJECTION[&amp;quot;Lambert_Conformal_Conic&amp;quot;],PARAMETER[&amp;quot;False_Easting&amp;quot;,1968500.0],PARAMETER[&amp;quot;False_Northing&amp;quot;,0.0],PARAMETER[&amp;quot;Central_Meridian&amp;quot;,-77.75],PARAMETER[&amp;quot;Standard_Parallel_1&amp;quot;,39.93333333333333],PARAMETER[&amp;quot;Standard_Parallel_2&amp;quot;,40.96666666666667],PARAMETER[&amp;quot;Latitude_Of_Origin&amp;quot;,39.33333333333334],UNIT[&amp;quot;Foot_US&amp;quot;,0.3048006096012192],AUTHORITY[&amp;quot;EPSG&amp;quot;,2272]]&lt;/WKT&gt;&lt;XOrigin&gt;-119214199.99986447&lt;/XOrigin&gt;&lt;YOrigin&gt;-96198499.99984394&lt;/YOrigin&gt;&lt;XYScale&gt;4143.1461906761197&lt;/XYScale&gt;&lt;ZOrigin&gt;0&lt;/ZOrigin&gt;&lt;ZScale&gt;1&lt;/ZScale&gt;&lt;MOrigin&gt;0&lt;/MOrigin&gt;&lt;MScale&gt;1&lt;/MScale&gt;&lt;XYTolerance&gt;0.00096544988178349567&lt;/XYTolerance&gt;&lt;ZTolerance&gt;2.0000000000000002e-005&lt;/ZTolerance&gt;&lt;MTolerance&gt;2&lt;/MTolerance&gt;&lt;HighPrecision&gt;true&lt;/HighPrecision&gt;&lt;WKID&gt;102729&lt;/WKID&gt;&lt;LatestWKID&gt;2272&lt;/LatestWKID&gt;&lt;/ProjectedCoordinateSystem&gt;</peXml>
</coordRef>
</DataProperties>
<ArcGISFormat>1.0</ArcGISFormat>
<ArcGISstyle>FGDC CSDGM Metadata</ArcGISstyle>
</Esri>
<metainfo>
<metd Sync="TRUE">20110818</metd>
<langmeta Sync="TRUE">en</langmeta>
<metstdn Sync="TRUE">FGDC Content Standards for Digital Geospatial Metadata</metstdn>
<mettc Sync="TRUE">local time</mettc>
<metc>
<cntinfo>
<cntperp>
<cntper>Larry Szarek</cntper>
<cntorg>PWD GIS UNIT</cntorg>
</cntperp>
<cntpos>GIS Manager</cntpos>
<cntvoice>215-685-6333</cntvoice>
<cntfax>215-685-6207</cntfax>
<cntemail>larry.szarek@phila.gov</cntemail>
<hours>Mon - Fri, 8:30am - 5:00pm</hours>
<cntaddr>
<addrtype>mailing and physical address</addrtype>
<address>1101 Market Street, ARAMARK TOWER, 4th Floor</address>
<city>Philadelphia</city>
<state>PA</state>
<postal>19107</postal>
</cntaddr>
</cntinfo>
</metc>
<metac>None</metac>
<metuc>None</metuc>
<metfrd>01/01/2007</metfrd>
<metsi>
<metsc>Unclassified</metsc>
<metshd>Public access to these feature classes except the hydrant or inlet feature classes is restricted via request and via sub section. An entire City-wide version of a particular feature class should not be released to the public as the citywide water and wastewater utility infrastructure are of a highly sensitive nature. But the metadata on these items is not of sensitive nature as it only describes the data in words. </metshd>
<metscs>No Security Considerations</metscs>
</metsi>
<metrd>02/14/2006</metrd>
<metstdv Sync="TRUE">FGDC-STD-001-1998</metstdv>
</metainfo>
<mdDateSt Sync="TRUE">20200429</mdDateSt>
<distinfo>
<custom>See Standard Order Process.</custom>
<distrib>
<cntinfo>
<cntperp>
<cntper>Larry Szarek</cntper>
<cntorg> PWD GIS UNIT</cntorg>
</cntperp>
<cntpos>GIS Manager</cntpos>
<cntvoice>215-685-6333</cntvoice>
<cntemail>larry.szarek@phila.gov</cntemail>
<hours>Mon - Fri, 8:30am - 5:00pm</hours>
<cntaddr>
<addrtype>mailing and physical address</addrtype>
<address>1101 Market St, ARAMARK TOWER, 4th floor</address>
<city>Philadelphia</city>
<state>PA</state>
<postal>19107</postal>
</cntaddr>
<cntfax>215-685-6207</cntfax>
</cntinfo>
</distrib>
<distliab>The City of Philadelphia makes no warranty or representation, express or implied, with respect to the quality, content, accuracy, completeness, currency, freedom from computer virus, or non-infringement of proprietary rights, of any of the design, information, text, graphics, images, pages, interfaces, links, software, or other materials and items contained in this dataset. All such items and materials are provided on an
"as is" basis, and you are fully and solely responsible for your use of them and for any results or consequences of your use. They have been compiled from a variety of sources, including sources beyond the control of the City of Philadelphia and, and are subject to change without notice from the City of Philadelphia. Commercial use is prohibited without the prior written permission of the City of Philadelphia. In no event shall the City of Philadelphia or their agencies, officers, employees, agents, or representatives, be liable for any direct, indirect, special, punitive,
incidental, exemplary or consequential damages arising your accessing or using this data, or otherwise arising from the data or from anything contained in or displayed in this data. Nothing contained in or displayed in this data constitutes or is intended to constitute legal advice by the City of Philadelphia or any of their agencies, officers, employees, agents or representatives. These terms and conditions and all disputes arising under these terms and conditions shall be governed, construed and decided in accordance with the laws of the Commonwealth of Pennsylvania. The City of Philadelphia reserves the right to revise and change these terms and conditions at anytime and without any notice.</distliab>
<stdorder>
<ordering>NOTE: Use this template as a guide to construct your letter requesting City of Philadelphia GIS data. The letter must be on your organization's letterhead, signed by an officer of the corporation/organization, and must include all information requested below. Please pay close attention to items in &lt;bold and underlined&gt; and provide data requested in &lt;brackets&gt;. You will be asked to resubmit your request if all of the requested information is not included. In the event that the requestor is a contractor using the requested data as part of a contract with the City of Philadelphia, request shall reference the City department for which the work is being done. Please direct your request to:
City of Philadelphia -PWD
GIS Unit ARAMARK TOWER 4th floor
1101 Market St., Philadelphia, PA 19107
Attn: Larry Szarek
****************************
&lt;XYZ COMPANY&gt; is requesting a portion of the City of Philadelphia's GIS database &lt;IDENTIFY COVERAGES OR DATA LAYERS REQUESTED&gt; for use in &lt;PROJECT DESCRIPTION&gt; for &lt;DEPARTMENT/AGENCY NAME&gt;. The target area is bounded by &lt;PROJECT BOUNDARIES&gt;.
&lt;XYZ COMPANY&gt; confirms that it will abide by the following conditions for use of this data. &lt;XYZ COMPANY&gt; will use this database solely in connection with the project described above. For the purpose of any data displayed on a public web site, &lt;XYZ COMPANY&gt; will remove any attribution from the data that will possibly identify it as being the City of Philadelphia. The database will be deleted from any electronic storage media in possession of XYZ COMPANY at the completion of the project and the CD on which it is delivered will be returned to the PWD. Printed maps or reports of any kind displaying data from this database will be presented only to the participating &lt;NEIGHBORHOODS, CITY AGENCIES, PROJECT COMMITTEES, OTHERWISE APPROPRIATE RECEPIENTS&gt; and only in connection with this project. Display materials generated from this database will not be used on any other project nor for demo or promotional use even if the audience is a City agency unless &lt;XYZ COMPANY&gt; has obtained a prior written agreement from the PWD.
&lt;XYZ Company&gt;will not re-distribute the data in digital format to anyone for any purpose. All persons associated with &lt;XYZ COMPANY&gt; with access to this database will be informed that it is the property of the City of Philadelphia PWD and advised of the terms under which &lt;XYZ COMPANY&gt; has agreed to its use. &lt;XYZ COMPANY&gt; acknowledges that the City makes no representation about the accuracy of any specific information &lt;XYZ COMPANY&gt; has requested. &lt;XYZ COMPANY&gt; will assume complete responsibility for any and all occurrences resulting from &lt;XYZ COMPANY'S&gt; use or display of this database.
&lt;Signature by Officer of the Corporation/Organization&gt;</ordering>
<fees>None</fees>
</stdorder>
<techpreq>To use the Personal Geodatabase or Shapefile outputs, the user must own a licensed copy(ies) of ESRI ArcMAP software version 9.0 or greater. </techpreq>
<resdesc>Downloadable Data if Hydrant or Inlet data. If not see security paramaetrs</resdesc>
<availabl>
<timeinfo>
<sngdate>
<caldate>from 06.2005 to present</caldate>
</sngdate>
</timeinfo>
</availabl>
</distinfo>
<spref>
<horizsys>
<geodetic>
<horizdn Sync="TRUE">North American Datum of 1983</horizdn>
<ellips Sync="TRUE">Geodetic Reference System 80</ellips>
<semiaxis Sync="TRUE">6378137.000000</semiaxis>
<denflat Sync="TRUE">298.257222</denflat>
</geodetic>
<cordsysn>
<geogcsn Sync="TRUE">GCS_North_American_1983</geogcsn>
<projcsn Sync="TRUE">NAD_1983_StatePlane_Pennsylvania_South_FIPS_3702_Feet</projcsn>
</cordsysn>
<planar>
<planci>
<plance Sync="TRUE">coordinate pair</plance>
<plandu Sync="TRUE">survey feet</plandu>
<coordrep>
<absres Sync="TRUE">0.000241</absres>
<ordres Sync="TRUE">0.000241</ordres>
</coordrep>
</planci>
</planar>
</horizsys>
<vertdef>
<altsys>
<altenc Sync="TRUE">Explicit elevation coordinate included with horizontal coordinates</altenc>
<altres Sync="TRUE">1.000000</altres>
</altsys>
</vertdef>
</spref>
<dataqual>
<attracc>
<attraccr>This data shows Philadelphia Water Department Utility Assets. Its accuracy varies by location. Most of the data is accurate to +/- 1 ft based on the Construction As-Built Drawings it was digitized from. Note that the data was then digitized with reference to 1996 Curblines that are accurate +/- 2ft and that the construction documents used to digitze were often measured in the Philadelphia Survey Standard of that particular area which varies from District to District. Some areas such as the Philadelphia Naval Business District (Navy Yard) or the Airport are not nearrly as accurate as +\- 1 ft as they were derived from other sources. These sources include old navy construction documents, field surveys, various conflicting maps both digital and paper. The data took three years to create and it is maintained daily by PWD GIS UNIT. The new maintenance edits are of higher spatial accuracy as GPS equipment is available for field surveys. To determine the newer maintained areas, query the edited_date by those after May 2005. </attraccr>
</attracc>
<posacc>
<horizpa>
<horizpar>Most of the data is accurate to +/- 1 ft based on the Construction As-Built Drawings it was digitized from. Note that the data was then digitized with reference to 1996 Curblines that are accurate +/- 2ft and that the construction documents used to digitze were often measured in the Philadelphia Survey Standard of that particular area which varies from District to District. Some areas such as the Philadelphia Naval Business District (Navy Yard) or the Airport are not nearrly as accurate as +\- 1 ft as they were derived from other sources. These sources include old navy construction documents, field surveys, various conflicting maps both digital and paper. The data took three years to create and it is maintained daily by PWD GIS UNIT. The new maintenance edits are of higher spatial accuracy as GPS equipment is available for field surveys. To determine the newer maintained areas, query the edited_date by those after May 2005. </horizpar>
</horizpa>
<vertacc>
<vertaccr>NAVD 88, but any elevation data on features is held explicitly in the elevation field. Example (elevation rim of manholes is in Philly Datum.) Note: the Philadelphia vertical datum differs from the NGVD 1929 vertical datum by 5.71 feet and differs by +/- 4.63 feet as related to NAVD 1988 vertical datum.
</vertaccr>
<qvertpa>
<vertacce>The assets themselves do not have a Z-value for elevation. There are elevation attributes for some of the data such as but not limited to Manholes: RIM_ELEVATION for example. These are in feet (US)</vertacce>
</qvertpa>
</vertacc>
</posacc>
<lineage>
<srcinfo>
<srccontr>The ERV (Engineering Records Viewer) system was used as a digital document management system by CH2MHILL to download the as built construction drawings, plat, plates, water age cards. The Rider Sheets which show the sketches of the field work were not part of this digital system and the paper copies were used</srccontr>
<typesrc>disc</typesrc>
<srccitea>WATER: </srccitea>
</srcinfo>
<procstep>
<procdesc>The data was taken from ESRI Covergaes and moved into Geodatabases on the ArcSDE 9.0 platform. The geodatabases were then formed into Geometric Networks as full connectivity rules were applied. This import took place from February 2005 until June 2005</procdesc>
<procsv>ArcSDE 9.0</procsv>
<proccont>
<cntinfo>
<cntperp>
<cntper>Larry Szarek</cntper>
<cntorg>PWD GIS UNIT </cntorg>
</cntperp>
<cntpos>GIS Manager</cntpos>
<cntvoice>215 685 6333</cntvoice>
<cntfax>215 685 6207</cntfax>
<cntemail>larry.szarek@phila.gov</cntemail>
<hours>M-F 8 30 a - 5 p</hours>
</cntinfo>
</proccont>
<srcused>withheld</srcused>
<procdate>02/2005 - 06/2005</procdate>
</procstep>
<procstep>
<procdesc Sync="TRUE">Metadata imported.</procdesc>
<srcused Sync="FALSE">withheld</srcused>
<date Sync="TRUE">20060125</date>
<time Sync="TRUE">10393400</time>
</procstep>
</lineage>
</dataqual>
<dataIdInfo>
<envirDesc Sync="TRUE"> Version 6.2 (Build 9200) ; Esri ArcGIS 10.5.1.7333</envirDesc>
<dataLang>
<languageCode Sync="TRUE" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</dataLang>
<idCitation>
<resTitle Sync="TRUE">Infrastructure_Public.GISAD.wHydrant</resTitle>
<presForm>
<PresFormCd Sync="TRUE" value="005"/>
</presForm>
</idCitation>
<spatRpType>
<SpatRepTypCd Sync="TRUE" value="001"/>
</spatRpType>
<dataExt>
<geoEle>
<GeoBndBox esriExtentType="native">
<westBL Sync="TRUE">2662397.971108</westBL>
<eastBL Sync="TRUE">2748899.689248</eastBL>
<northBL Sync="TRUE">307437.664101</northBL>
<southBL Sync="TRUE">201019.280653</southBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</GeoBndBox>
</geoEle>
</dataExt>
<geoBox esriExtentType="decdegrees">
<westBL Sync="TRUE">-75.278038</westBL>
<eastBL Sync="TRUE">-74.958093</eastBL>
<northBL Sync="TRUE">40.150504</northBL>
<southBL Sync="TRUE">39.851428</southBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</geoBox>
<dataExt>
<geoEle>
<GeoBndBox esriExtentType="search">
<exTypeCode Sync="TRUE">1</exTypeCode>
<westBL Sync="TRUE">-75.566636</westBL>
<eastBL Sync="TRUE">-74.955922</eastBL>
<northBL Sync="TRUE">40.149458</northBL>
<southBL Sync="TRUE">39.851363</southBL>
</GeoBndBox>
</geoEle>
</dataExt>
</dataIdInfo>
<mdLang>
<languageCode Sync="TRUE" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</mdLang>
<mdStanName Sync="TRUE">ISO 19115 Geographic Information - Metadata</mdStanName>
<mdStanVer Sync="TRUE">DIS_ESRI1.0</mdStanVer>
<mdChar>
<CharSetCd Sync="TRUE" value="004"/>
</mdChar>
<mdHrLv>
<ScopeCd Sync="TRUE" value="005"/>
</mdHrLv>
<mdHrLvName Sync="TRUE">dataset</mdHrLvName>
<distInfo>
<distributor>
<distorTran>
<onLineSrc>
<orDesc Sync="TRUE">002</orDesc>
<linkage Sync="FALSE">withheld</linkage>
</onLineSrc>
</distorTran>
<distorFormat>
<formatName Sync="FALSE">Feature Class</formatName>
</distorFormat>
</distributor>
<distFormat>
<formatName Sync="FALSE">Feature Class</formatName>
</distFormat>
</distInfo>
<spdoinfo>
<direct Sync="TRUE">Vector</direct>
<ptvctinf>
<esriterm Name="Infrastructure_Public.GISAD.wHydrant">
<efeatyp Sync="TRUE">Simple</efeatyp>
<efeageom Sync="TRUE" code="1"/>
<esritopo Sync="TRUE">FALSE</esritopo>
<efeacnt Sync="TRUE">31385</efeacnt>
<spindex Sync="TRUE">TRUE</spindex>
<linrefer Sync="TRUE">FALSE</linrefer>
</esriterm>
</ptvctinf>
</spdoinfo>
<refSysInfo>
<RefSystem>
<refSysID>
<identCode Sync="TRUE" code="2272">NAD_1983_StatePlane_Pennsylvania_South_FIPS_3702_Feet</identCode>
<idCodeSpace Sync="TRUE">EPSG</idCodeSpace>
<idVersion Sync="TRUE">6.12(9.0.0)</idVersion>
</refSysID>
</RefSystem>
</refSysInfo>
<spatRepInfo>
<VectSpatRep>
<geometObjs Name="Infrastructure_Public.GISAD.wHydrant">
<geoObjTyp>
<GeoObjTypCd Sync="TRUE" value="004"/>
</geoObjTyp>
<geoObjCnt Sync="TRUE">31385</geoObjCnt>
</geometObjs>
<topLvl>
<TopoLevCd Sync="TRUE" value="001"/>
</topLvl>
</VectSpatRep>
</spatRepInfo>
<eainfo>
<detailed Name="Infrastructure_Public.GISAD.wHydrant">
<enttyp>
<enttypl Sync="TRUE">Infrastructure_Public.GISAD.wHydrant</enttypl>
<enttypt Sync="TRUE">Feature Class</enttypt>
<enttypc Sync="TRUE">31385</enttypc>
</enttyp>
<attr>
<attrlabl Sync="TRUE">OBJECTID</attrlabl>
<attalias Sync="TRUE">OBJECTID</attalias>
<attrtype Sync="TRUE">OID</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Internal feature number.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">AncillaryRole</attrlabl>
<attalias Sync="TRUE">AncillaryRole</attalias>
<attrtype Sync="TRUE">SmallInteger</attrtype>
<attwidth Sync="TRUE">2</attwidth>
<atprecis Sync="TRUE">5</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Enabled</attrlabl>
<attalias Sync="TRUE">ENABLED</attalias>
<attrtype Sync="TRUE">SmallInteger</attrtype>
<attwidth Sync="TRUE">2</attwidth>
<atprecis Sync="TRUE">5</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">EditedBy</attrlabl>
<attalias Sync="TRUE">EDITEDBY</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">50</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">EditDate</attrlabl>
<attalias Sync="TRUE">GPS</attalias>
<attrtype Sync="TRUE">Integer</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">StickerNumber</attrlabl>
<attalias Sync="TRUE">EDITDATE</attalias>
<attrtype Sync="TRUE">Date</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">SegID</attrlabl>
<attalias Sync="TRUE">StickerNumber</attalias>
<attrtype Sync="TRUE">Integer</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Historical_UID</attrlabl>
<attalias Sync="TRUE">Historical_UID</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">13</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">System</attrlabl>
<attalias Sync="TRUE">SYSTEM</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">12</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Historical_SubType</attrlabl>
<attalias Sync="TRUE">Historical_SubType</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">MonthDay_Installed</attrlabl>
<attalias Sync="TRUE">MonthDay_Installed</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">5</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Year_Installed</attrlabl>
<attalias Sync="TRUE">Year_Installed</attalias>
<attrtype Sync="TRUE">Integer</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">LifecycleStatus</attrlabl>
<attalias Sync="TRUE">LifecycleStatus</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">5</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Street_On</attrlabl>
<attalias Sync="TRUE">Street_On</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">50</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Street_From</attrlabl>
<attalias Sync="TRUE">Street_From</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">50</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Street_To</attrlabl>
<attalias Sync="TRUE">Street_To</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">50</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">ContractNumber</attrlabl>
<attalias Sync="TRUE">SegID</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Owner</attrlabl>
<attalias Sync="TRUE">ContractNumber</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">20</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Rotation</attrlabl>
<attalias Sync="TRUE">OWNER</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">35</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Comments</attrlabl>
<attalias Sync="TRUE">ROTATION</attalias>
<attrtype Sync="TRUE">Integer</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Historical_Comments</attrlabl>
<attalias Sync="TRUE">Comments</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">80</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Subtype</attrlabl>
<attalias Sync="TRUE">Historical_Comments</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">80</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">SymbolGroup</attrlabl>
<attalias Sync="TRUE">Subtype</attalias>
<attrtype Sync="TRUE">Integer</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">X_Coord</attrlabl>
<attalias Sync="TRUE">SYMBOLGROUP</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">20</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Y_Coord</attrlabl>
<attalias Sync="TRUE">X_Coord</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">19</atprecis>
<attscale Sync="TRUE">11</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">HydrantNumber</attrlabl>
<attalias Sync="TRUE">Y_Coord</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">19</atprecis>
<attscale Sync="TRUE">11</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape</attrlabl>
<attalias Sync="TRUE">HydrantNumber</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">15</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Feature geometry.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Coordinates defining the features.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">ANCILLARYROLE</attrlabl>
<attalias Sync="TRUE">Shape</attalias>
<attrtype Sync="TRUE">Geometry</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Feature geometry.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Coordinates defining the features.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">ENABLED</attrlabl>
<attalias Sync="TRUE">FACILITYID</attalias>
<attrtype Sync="TRUE">GUID</attrtype>
<attwidth Sync="TRUE">38</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">EDITEDBY</attrlabl>
<attalias Sync="TRUE">DEPTHBURIED</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">8</atprecis>
<attscale Sync="TRUE">2</attscale>
<attrdef>Name of PWD GIS Staff Member who created or last modified the feature. If EDITEDBY is blank, the feature was created under the original data conversion contract and has not been modified.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">GPS</attrlabl>
<attalias Sync="TRUE">STATUSSOURCE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">12</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Indicates whether or not the feature has been physically located using GPS equipment.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">EDITDATE</attrlabl>
<attalias Sync="TRUE">DATESOURCE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">12</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Date the feature was created or modified. If EDITDATE is blank, the feature was created under the original data conversion contract and has not been modified.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">STICKERNUMBER</attrlabl>
<attalias Sync="TRUE">CONTRACTSOURCE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">12</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>PWD source material reference number for the source of the position of the facility.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">SYSTEM</attrlabl>
<attalias Sync="TRUE">STICKERLINK</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">100</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Denotes the PWD system the feature is part of.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">HISTORICAL_SUBTYPE</attrlabl>
<attalias Sync="TRUE">CONTRACTLINK</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">100</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Code denoting the type of facility represented. Typically not maintained.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">MONTHDAY_INSTALLED</attrlabl>
<attalias Sync="TRUE">LOCATION</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">150</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Month and day of installation.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">YEAR_INSTALLED</attrlabl>
<attalias Sync="TRUE">FICO</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">10</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Year of installation.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">LIFECYCLESTATUS</attrlabl>
<attalias Sync="TRUE">HYDTYPE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">10</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>The operational status of the facility.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">STREET_ON</attrlabl>
<attalias Sync="TRUE">LOCKTYPE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">10</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Name of the street the facility falls within.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">STREET_FROM</attrlabl>
<attalias Sync="TRUE">BONNETCOLOR</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">10</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>First intersecting street defining the block the facility falls within.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">STREET_TO</attrlabl>
<attalias Sync="TRUE">VALVEBOX</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">10</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Last intersecting street defining the block the facility falls within.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">HISTORICAL_UID</attrlabl>
<attalias Sync="TRUE">HYDRAULICID</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">15</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Unique Identifier. Typically not maintained.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">SEGID</attrlabl>
<attalias Sync="TRUE">wMain_Diameter</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">8</atprecis>
<attscale Sync="TRUE">2</attscale>
<attrdef>Unique street segment identifier from the citywide digital street centerline coverage file.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">CONTRACTNUMBER</attrlabl>
<attalias Sync="TRUE">DEFECT</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">50</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>The contract number the facilities were installed under.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">OWNER</attrlabl>
<attalias Sync="TRUE">OUTOFSERVICE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">5</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Name of the owner of the facility.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">ROTATION</attrlabl>
<attalias Sync="TRUE">ROTATION</attalias>
<attrtype Sync="TRUE">Integer</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Rotation angle of the facility relative to the attached pipelines. (used for symbol rotation)</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">COMMENTS</attrlabl>
<attalias Sync="TRUE">COMMENTS</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">80</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Comments made by editor which describe a feature outside of existing attributes.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">HISTORICAL_COMMENTS</attrlabl>
<attalias Sync="TRUE">HISTORICAL_COMMENTS</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">80</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>PWD notes from any source materials used or comments concerning the conversion of the facility. Typically not maintained.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">SUBTYPE</attrlabl>
<attalias Sync="TRUE">Subtype</attalias>
<attrtype Sync="TRUE">Integer</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Code denoting the type of facility represented. Differentiates features based on their connectivity rules.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">SYMBOLGROUP</attrlabl>
<attalias Sync="TRUE">SYMBOLGROUP</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">20</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Refers to symbol name in PWD custom stylesheets.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">X_COORD</attrlabl>
<attalias Sync="TRUE">X_COORD</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">19</atprecis>
<attscale Sync="TRUE">11</attscale>
<attrdef>Latitude of feature</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">Y_COORD</attrlabl>
<attalias Sync="TRUE">Y_COORD</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">19</atprecis>
<attscale Sync="TRUE">11</attscale>
<attrdef>Longitude of feature</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">HYDRANTNUMBER</attrlabl>
<attalias Sync="TRUE">HYDRANTNUMBER</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">15</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>The PWD hydrant database ID number for hydrant facilities, to be populated by linkage with legacy database.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">SHAPE</attrlabl>
<attalias Sync="TRUE">Shape</attalias>
<attrtype Sync="TRUE">Geometry</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Feature geometry.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Coordinates defining the features.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">FACILITYID</attrlabl>
<attalias Sync="TRUE">FACILITYID</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">15</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>An identifier for the asset that allows searching through a specific feature class. It is comprised of the feature class id and sequential number. This is not a unique value.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">DEPTHBURIED</attrlabl>
<attalias Sync="TRUE">DEPTHBURIED</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">8</atprecis>
<attscale Sync="TRUE">2</attscale>
<attrdef>Depth of cover material over facility in US feet.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">STATUSSOURCE</attrlabl>
<attalias Sync="TRUE">STATUSSOURCE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">12</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>PWD source material reference number for the source of the status information.</attrdef>
</attr>
<attr>
<attrlabl Sync="TRUE">DATESOURCE</attrlabl>
<attalias Sync="TRUE">DATESOURCE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">12</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">CONTRACTSOURCE</attrlabl>
<attalias Sync="TRUE">CONTRACTSOURCE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">12</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">HYDRAULICID</attrlabl>
<attalias Sync="TRUE">HYDRAULICID</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">15</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
</detailed>
</eainfo>
</metadata>
